Watching TV
Home: "Power Saving" is set to "On"+and AV MODE
is setto "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE is
set to "DYNAMIC(Fixed)".
4,
Air/Cable(Antenna
setting}
+ Make sure what kind of connection is
made with your TV when selecting "Air"
or "Cable".
+ Press _./T to select "Air" or "Cable" and
7, Completed
After setting complete,
the screen will
show "EZ Setup Completed",
press
ENTER to finish the EZ Setup. The TV will
then switch to the first channel found.
press _ to the next step.
CH Search
(Channel
search}
Channel auto search makes the TV look for all
channels viewable in the set area.
5, When
"Air"
or "Cable"
is selected
in Antenna
setting:
Press A/T to select "Start", and then
press ENTER.
• Auto programming
may take 20+ minutes to complete.
Please wait until you see the Auto programming
complete
message.
6=
Start channel
searching
+ Wait until the channel scan to complete.
+ If you press EXIT, the process will return
to the previous step.
+ If you skip this step, the channel search
can be performed in the TV Menu. (See
page 32.)