Appendix
Problem
Possible Solution
• Check if you pressed POWER on the remote control unit, (See page
• No power
19,) if the indicator on the TV is still red, press POWER on the TV,
• is the AC cord disconnected?
(See page 8,)
• Has the power been turned on? (See page 19,)
• External influences such as lightning, static electricity, may cause
• Unit cannot be
improper operation, in this case, operate the unit after first turning
operated,
off the power of the TV or unplugging the AC cord and re-plugging
it after 1 or 2 minutes,
• Are batteries inserted with polarity ( +, - ) aligned? (See page 10,)
• Remote control unit
• Are batteries worn out? (Replace with new batteries.)
does not operate,
• Are you using it under strong or fluorescent lighting?
• is a fluorescent light illuminated near the remote control sensor?
• Picture is cut off/with
• Are screen mode adjustments such as picture size made correctly?
sidebar screen,
(See page 23,)
• Strange color, light
• Adjust the picture tone, (See page 26 and 27,)
color, or color
• is the room too bright? The picture may look dark in a room that
misalignment,
is too bright,
• is the sleep timer set? (See page 21 ,)
• Power is suddenly
• The unit's internal temperature has increased, Remove any
turned off,
objects blocking vent,
• No picture
• is connection to other components
correct? (See page 16,)
• is the correct input selected? (See page 14,)
• is the volume too low? (See page 21 ,)
• No sound
• Have you pressed MUTE on the remote control unit? (See page 21 ,)
• The TV sometimes
• This is not a malfunction, This happens when the cabinet slightly
makes a cracking
expands and contracts according to change in temperature, This
sound,
does not affect the TV's performance,
If you forgot the password number, reset the secret number by following the procedures below:
1. Press MENU
2. Select "lnitialSetup",
press "ENTER"
3. Select "Individual
Setup", press "ENTER"
4. Press number 7071
5. Select "Secret
No."
6. Enter new password
As a precautionary
measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
Cautions regarding use in high and low temperature
environments
• When the unit is used in a low temperature space (e,g, room, office), the picture may leave
trails or appear slightly delayed, This is not a malfunction, and the unit will recover when the
temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed
to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid
Crystal panel to malfunction.
Storage temperature: -4°F to +140°F (-20°0 to +60°0)
(D" 38