Troubleshooting; Peripherals - SOMFY Dexxo Pro io Serie Manual De Instalación

TROUBLESHOOTING

The LCD display is situated under the lighting cover. It provides motor operation status.
The main operating codes are as follows:
Code Description
Waiting for a command
C1
Door opening
C2
Waiting for the door to close
C3
Door closing
C4
Obstacle detection
C5
Safety input active
C6
Pedestrian door safety contact active
C9
Working from back-up battery
Cd
Waiting for a command
If other codes are displayed, contact your Somfy installer.

PERIPHERALS

A number of peripherals are available.
Key Description
Keytis 4 io
1
Keytis 4 home io
2
Photoelectric cells
3
Orange light
4
Keyswitch
5
Battery
6
Release lock
7
Outside release lock
8
Door locking kit
9
Comments
Indicates that the door encountered an obstacle. The display is maintained for 30 s after detection.
Indicates that an obstacle preventing door closure is present between the photoelectric cells or is in contact with
the safety sensor bar installed on the door.
Indicates that the pedestrian door within the garage door is open. Door operation is inhibited.
Indicates that the main power supply to the motor is cut and that the motoris powered by the battery back-
up pack.
19
Comments
Hand held 4 channel remote control.
Hand held 4 channel remote control + general closure function.
To prevent door closure if an obstacle is detected.
To signal a warning when the door operates.
Keyswitch designed for use outside the garage.
For guaranteed operation even during a power break.
To engage the manual release system from the outside using the existing door handle.
Highly recommended when the garage door is the only access point into the garage.
To engage the manual release system from the outside using the existing door handle.
Highly recommended when the garage door is the only access point into the garage.
A system to reinforce door locking.
7