5.5.3 Instalación remota del terminal a hasta 500 m en una red
pLAN con cable AWG20/22 apantallado
Este tipo de instalación remota se muestra en la Fig. 5.5.3.1, requiere
una fuente de alimentación independiente del terminal compartido.
5.6 Especificaciones técnicas de la red pLAN
Las características técnicas de la red pLAN se pueden resumir en la
siguiente tabla.
descripción
comunicación estándar
baudios (kbits/s)
protocolo
longitud máx. de la red (m)
características
RS485
65,2
Multimaster (protocolo de CAREL)
500
Tabla 5.6.1
5.5.3 Remote installation of the terminal at up to 500m in a pLAN
network using an AWG20/22 shielded cable
This type of remote installation is shown in Fig. 5.5.3.1; it requires the
independent power supply of the shared terminal.
5.6 Technical specifications of the pLAN network
The technical specifications of the pLAN network can be summarised
in the following table.
description
communication standard
baudrate (kbit/s)
protocol
max. length of the network (m)
34
Fig. 5.5.3.1
characteristic
RS485
65.2
Multimaster (CAREL proprietary protocol)
500
pCO
XS
manual - cod. +030220347 - rel. 1.0 - 18.03.03
Table 5.6.1