End Of Product Life; Troubleshooting; Chart Of Medical Device Symbols Used - Cuda surgical Elite 1000 Manual Del Operador

Ocultar thumbs Ver también para Elite 1000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

9.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to
manufacturer at the end of product life.
10.

TROUBLESHOOTING

Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but Xenon lamp will not
ignite.
11.

CHART OF MEDICAL DEVICE SYMBOLS USED

®
LIT-217 CUDA
SURGICAL
(English)
Solution
A. Check that the AC power cord is properly connected.
B. Check the circuit breakers. If necessary, reset.
C. Power input switch is in the off position
A. Check to make sure lamp cartridge is seated properly.
B. Check that the lamp door is secured.
C. Check hour meter; if lamp hours exceed the rated
lamp life, replace the lamp (refer to 8.1).
Manufacturer
Date of manufacture (YYYY-MM-DD)
"Authorized Representative" in the European
Community
Caution
Caution: Federal law restricts this device to
sale by or on the order of a licensed
healthcare practitioner
Consult Instructions for Use
CE mark
Not disposable in general waste,
Caution: Hot Surface
Caution: Dangerous Voltage
Product Safety Mark
Do not use if package is damaged
Rev. B
Date of Revision: 05/02/17
Page 13 of 71

Publicidad

Tabla de contenido
loading

Tabla de contenido