End Of Product Life; Troubleshooting - Cuda surgical XLS-180 Manual De Uso

POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid
to the factory. Your product will be inspected and an estimate of repair charges will be
submitted to you for approval.
In the U.S call:
•
From Jacksonville, FL call:
•
9.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to
manufacturer at the end of product life.

10. TROUBLESHOOTING

Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but Xenon lamp will not
ignite.
®
LIT034
CUDA SURGICAL XLS-180
(English)
877 814 2237 (toll free)
904 208 2291
Solution
A. Check that the AC power cord is properly
connected.
B. Check the fuses. If necessary, replace.
A. Check lamp connection.
B. Check that the lamp door cover is secured.
C. Check hourmeter if lamp hours exceeds the rated lamp life
Replace the lamp (refer to 8.1).
Rev. P
Date of Revision: 02/09/17
Page 11 of 72