Printer Test - Mettler Toledo P25 Manual De Referencia

Example for setting the day (P26 / P28 only)
Open the menu
− Hold down the
− Select the menu option Day with the
− Select the day, e.g. day 21.
Scroll up with the
Scroll down with the
Save the settings
− Hold down the
Statistics application (P28 only)
Sample weight must be in the range of 70% - 130% of the current average value.
Minimum dynamic weight changed must be 100 d.
M+
1 Press to start the Statistics application (LED on).
M+
2 Add a new sample and press M+.
F
3 Press to print subtotal, if needed.
4 Press and hold
Note
Unit change during the application is not permitted.
•
Maximal 999 sample.
•
Totaling application (P28 only)
Minimum weights + 1 d.
M+
1 Press to start the Totaling application (LED on).
M+
2 Add a new sample and press M+.
3 Press F to print subtotal, if needed.
4 Press and hold
Note
Unit change during the application is not permitted.
•
Maximal 999 sample.
•

6.3 Printer Test

The printer is equipped with a self-test that automatically prints out the character set of the printer (factory
settings IBM/DOS).
Starting the test
− Press and power on the printer.
ð The printer prints out the current settings.
Terminating the test
− Power off the printer.
Printer
F
key until Reset appears.
F key.
key.
key.
F key until Stored appears.
to print and end the Statistics application (LED off).
M+
to print and end the Totaling application (LED off).
M+
Menu​ ​ 13