General Safety Indications; Safety Notes; Safety Decals - breviglieri TEKNOFOLD 450 V500 Instrucciones De Empleo Y Mantenimiento

CAUTION
The operator is advised to wear adequate ear muffs as
personal protective equipment to prevent damage to his
hearing during daily work with the machine.

2 GENERAL SAFETY INDICATIONS

2.1 SAFETY NOTES

The user must inform his personnel about the risks deriving from
accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations
established by the Directives and by the laws in force in the
country where the machine is used. It is therefore essential for
operators to carefully read this manual, particularly the safety
notes, and to pay great attention to operations which could be
particularly hazardous.
The Manufacturer declines all and every liability for failure
to comply with the safety and prevention regulations given
in this manual.
Pay attention to this symbol when it appears in the ma-
nual. It indicates a possible danger situation.
There are three danger levels:
▪
DANGER: This is the maximum level danger signal and
warns that unless the described operations are carried
out correctly, they will cause serious injuries, death or
long term health hazards.
▪
WARNING: The «WARNING» signal warns that unless
the described operations are carried out correctly, they
could cause serious injuries, death or long term health
hazards.
▪
CAUTION: This sign warns that unless the described
operations are carried out correctly, they could cause
damage to the machine and/or persons.

2.2 SAFETY DECALS

The machine has been designed and built in compliance with
all possible safety standards able to safeguard those who work
with it. Despite this, there may still be residue hazards which are
signalled on the machine by decals. These decals (pictograms)
are affixed to the machine and indicate the various situations
of insecurity and danger in a brief form.
Keep the decals clean and immediately replace them if they
detach or become damaged.
Carefully read the following descriptions and memorize the
meanings of the safety decals.
Carefully
read the
instruction
manual
before
beginning
work.
Danger of
upper limbs
being cut off.
Do not remove
the guards and
keep well away
from moving
parts.
Stones could be
thrown up by
the machine.
When the
machine is
in operation
keep a safety
distance the
unauthorized
person
Danger of being crushed in the
process of opening/closing
Never get between two power
harrows bodies
Danger of
falling.
It is absolutely
forbidden to
climb on to the
machine.
Personal
protective
equipment
to safeguard
against noise.
- 23 -
teknofold 450
Before
proceeding with
maintenance
operations, stop
the machine,
lower it to the
ground and
consult the
instruction
manual
Danger of
being caught
up by the
driveline.
It is absolutely
forbidden to
get near the
driveline when it is
operating.
Danger of general being
crushed.
Never get between two power
harrows bodies
Pipes with
high-
pressure
fluids.
Mind oil
splashes in
case of pipe
breakage.
Danger of
lower limbs
being cut
off. Keep
at a safety
distance
from the
machine
when it
operates.
Hitching
points
to lift the
machine.