Preparing For Storage; Spare Parts - breviglieri TEKNOFOLD 450 V500 Instrucciones De Empleo Y Mantenimiento

5.3 PREPARING FOR STORAGE

Proceed with the following operations at the end of the season
or if the machine is to remain idle for a long period of time:
▪
Wash all fertilizers and chemical products from the ma-
chine and dry it
▪
Carefully check the machine and replace any damaged or
worn parts
▪
Fully tighten all the screws and bolts, particularly the
ones that fix the tines
▪
Throughly grease the machine and then cover it with a
tarpaulin and store it in a dry place. If these operations
are carried out with care, it will be all to the user's advan-
tage as the machine will be in optimum conditions when
needed again.
If these operations are carried out with care, it will be all to
the user's advantage as the machine will be in optimum condi-
tions when needed again. If the machine must be dismantled,
comply with the anti-pollution laws in force. Old lubricants
must and the various components must be disposed of ac-
cording to their different structures.

5.4 SPARE PARTS

All the parts forming the machine can be ordered from the
Manufacturer, specifying:
▪
Machine model
▪
The serial number of the machine
▪
The year of manufacture
▪
The serial number of the required part (indicated in the
spare parts catalogue), a description of the part and the
required quantity
▪
The means of transport
Transport way: if this is not specified, the Manufacturer will
dedicate particular care to the service but shall not be liable for
delays in shipment due to unforeseen circumstances. The ship-
ping costs are always at the consignee's charge. The goods travel
at the purchaser's risk and peril even when sold carriage paid.
Remember that the Manufacturer is always at your disposal
for any assistance and/or spare parts you may required.
- 33 -
teknofold 450