Yamaha DM 2000 Manual De Instrucciones página 392

392
Appendix C: MIDI
13.4.6 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified parameter will be controlled.
Transmission
If [Parameter change TX] is ON and a parameter that is not assigned in the
[Control Assign Table] is changed, the Parameter Change messages are
transmitted on [Tx CH] device number channel.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00000001 01
0eeeeeee ee
0ppppppp pp
0ccccccc cc
DATA 0ddddddd dd
:
:
EOX 11110111 F7
13.4.7 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the value of the specified parameter will be transmit-
ted as a Parameter change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0011nnnn 3n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00000001 01
0eeeeeee ee
0ppppppp pp
0ccccccc cc
EOX 11110111 F7
13.4.8 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified parameter will be controlled.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 00000110 06
ADDRESS 00000010 02
0eeeeeee ee
0ppppppp pp
0ccccccc cc
DATA 0ddddddd dd
:
:
EOX 11110111 F7
DM2000 Version 2—Manual de Instrucciones
(Edit buffer)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Edit Buffer
Element no. (If 'ee' is 0, 'ee' is expanded
to two bytes)
Parameter no.
Channel no.
data
End of exclusive
(Edit buffer)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Edit Buffer
Element no. (If 'ee' is 0, 'ee' is expanded
to two bytes)
Parameter no.
Channel no.
End of exclusive
(Patch data)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
DM2000
Patch data
Element no. (If 'ee' is 0, 'ee' is expanded
to two bytes)
Parameter no.
Channel no.
data
End of exclusive
13.4.9 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the value of the specified parameter will be transmit-
ted as a Parameter change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM2000
MODEL ID 00000110 06
Patch data
ADDRESS 00000010 02
Element no. (If 'ee' is 0, 'ee' is expanded
0eeeeeee ee
to two bytes)
Parameter no.
0ppppppp pp
Channel no.
0ccccccc cc
End of exclusive
EOX 11110111 F7
13.4.10 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified parameter will be controlled.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM2000
MODEL ID 00000110 06
Setup data
ADDRESS 00000011 03
Element no. (If 'ee' is 0, 'ee' is expanded
0eeeeeee ee
to two bytes)
Parameter no.
0ppppppp pp
Channel no.
0ccccccc cc
data
DATA 0ddddddd dd
:
:
End of exclusive
EOX 11110111 F7
13.4.11 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the value of the specified parameter will be transmit-
ted as a Parameter change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM2000
MODEL ID 00000110 06
Setup data
ADDRESS 00000011 03
Element no. (If 'ee' is 0, 'ee' is expanded
0eeeeeee ee
to two bytes)
Parameter no.
0ppppppp pp
Channel no.
0ccccccc cc
End of exclusive
EOX 11110111 F7
13.4.12 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified parameter will be controlled.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM2000
MODEL ID 00000110 06
Backup data
ADDRESS 00000100 04
(Patch data)
(Setup memory)
(Setup memory)
(Backup memory)