Cleaning The Machine; Environmental Protection - GGP ITALY SV 415 E Manual De Instrucciones

Tabla de contenido

Publicidad

Given product evolution, the above mentioned rotors may 
be replaced in time with others having similar interchange-
able and operating safety features. 

4.2 CLEANING THE MACHINE

Do  not  spray  water  onto  and  avoid  wetting  the  motor  and 
electrical components.
Do not use aggressive liquids to clean the chassis.

5. ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of consider-
able  importance  when  using  the  machine,  for  the  benefit 
of  both  social  coexistence  and  the  environment  in  which 
we live.
–    T ry not to cause any disturbance to the surrounding area.
–    S crupulously  comply  with  local  regulations  for  the  dis-
posal of waste materials after working.
–    S crupulously  comply  with  local  regulations  for  the  dis-
posal  of  packaging,  deteriorated  parts  or  any  elements 
with a strong environmental impact; this waste must not 
be  disposed  of  as  normal  waste,  it  must  be  separated 
and taken to specified waste disposal centres where the 
material will be recycled.
–    W hen decommissioning, do not pollute the environment 
with the machine, hand it over to a disposal centre, in ac-
cordance with the local regulations in force.
6. DIAGNOSTICS
Source of problem
1. The machine does not work
Electric current does not reach
the machine
2. The current cuts off when the machine is started
The mains socket amperage is 
not sufficient
Other electrical appliances are
working
3. The machine stops during work
The protection device triggers
4. The machine stops frequently during work or it does not
operate in a regular manner
Demanding working conditions
The tine rotor is clogged
The grass-catcher is clogged
5. Poor and unsatisfactory performance levels
Tine rotor with worn or missing 
blades or springs
Grass too tall
Ground too wet
For any doubts or problems, please do not hesitate to con-
tact your nearest Customer Service Centre or Your Dealer.
10
What to do when ...
Corrective action
Check the electrical connection
Connect the machine to a mains 
socket with sufficient amperage
Do not connect other appliances
to the same mains socket at the 
same time
Wait at least 5 minutes before 
restarting the motor
Check that the rotor has been 
regulated accordingly with the 
conditions of the lawn and/or 
regulate it to a higher level
Unplug the machine from the 
mains, put on protective gloves 
and clean the rotor and
surrounding area
Reduce the quantity of removed 
material reducing the depth of 
the rotor.
Empty the grass-catcher regularly 
before it fills completely
Replace the rotor with an original 
part
Cut the grass to an adequate
height
Regulate the rotor to a higher
level or postpone work until 
ground conditions improve

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sc 1.5 e

Tabla de contenido