Installing The Cable Guide; Attaching And Detaching The Recoil; Installing The Grass Catcher Box; Fuel And Engine Oil - Viking MB 545 Manual De Instrucciones

1 Attaching left anti-kink cable
protection:
Attach anti-kink cable protection (F)
only as shown. Cables must be
routed under the handlebar. Loosen
rotary handle (H) prior to assembly
if necessary.
● Insert all cables into anti-kink cable
protection (F).
● First insert the anti-kink cable protection
in upper bore (3) of the lower
handlebar.
● Then allow the anti-kink cable
protection to engage in lower slot (4) of
the lower handlebar.
2 Attaching right anti-kink cable
protection:
MB 545, MB 545 T:
There are no cables on the right-
hand side of the handlebar,
therefore there is no anti-kink cable
protection on the right.
● The right anti-kink cable protection (F)
is attached in the same way as on the
left side.

8.3 Installing the cable guide

● Insert cable guide (E) into the
recesses in housing (1) and turn
towards the upper handlebar.
● Insert all cables into the cable guide.
● Allow the cable guide to engage in the
two bores provided using slight
pressure.
0478 111 9930 A - EN
8.4 Attaching and detaching the
recoil starter rope
MB 545 VE: The engine does not
have a recoil starter rope.
MB 545 VS: The motorstop lever
does not need to be pressed to
attach and detach the recoil starter
rope.
Attaching:
● Detach the spark plug socket from the
engine.
● Press motorstop lever (1) to the
handlebar and hold.
● Slowly pull out recoil starter rope (2)
and attach it to rope holder (3).
● Slowly release recoil starter rope (2)
and motorstop lever (1).
● Connect the spark plug socket.
Detaching:
● Detach the spark plug socket from the
engine.
● Press motorstop lever (1) to the
handlebar and hold.
● Slowly pull out recoil starter rope (2)
and detach it from rope guide (3).
4
● Slowly return recoil starter rope (2) and
release motorstop lever (1).
● Connect the spark plug socket.
8.5 Installing the grass catcher
box
● Fit upper part of grass catcher
box (C) onto lower part of grass catcher
box (B).
● Push pin (D) through bores provided
from inside.
5 ● Allow the upper part of the grass
catcher box to engage in the lower part
of the grass catcher box using slight
pressure.
● Attach the grass catcher box. (

8.6 Fuel and engine oil

Avoid damage to the machine
Top up engine oil before starting for
the first time. Use a suitable filling
aid when topping up the engine oil
and when refuelling (e.g. funnel).
Engine oil:
Please consult the engine
instruction manual for the type of
engine oil to be used and the oil capacity.
Check the oil filling level at regular
intervals (see engine instruction manual).
Avoid exceeding or falling below the
correct oil level.
Screw on the oil tank cap properly before
operating the engine.
Fuel:
Recommendation:
Fresh good quality fuels,
unleaded petrol.
Please consult the engine instruction
manual for details on the fuel quality
(octane rating).
6
9.8)
7
49