General Information; Description - Hilti TE 2 Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
TE 2/TE 2-E/TE 2-S/TE 2-M Rotary Hammer
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating
instructions are with the tool when
it is given to other persons.
Operating controls
Chuck release ring (TE 2-M)
Function selector switch
Control switch
Forwards / reverse switch (TE 2 / TE 2-S / TE 2-M)
Lockbutton
Component parts
Dust shield
Chuck
Side handle
Type plate
Contents

General information

Description
Technical data
Safety rules
Before use
Operation
Drilling
Forwards/reverse rotation
Insert tools and accessories
Care and maintenance
Disposal
Manufacturer's warranty - tools
Troubleshooting
Declaration of conformity
General information
In these operating instructions, this symbol indicates
points of particular importance to safety. The instruc-
tions at these points must always be observed in order
to avoid the risk of serious injury.
Caution: high voltage
Read the Return waste
operating material for
instructions recycling
before use.
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the power tool to which
these operating instructions apply is referred to as "the
tool".

Description

The TE 2 / TE 2-E / TE 2-S / TE 2-M is an electrically pow-
ered rotary hammer with pneumatic hammering mech-
anism designed for professional use.
The following items are supplied: power tool, (quick-
Page
release chuck TE 2-M), operating instructions, grease
11
(except TE 2-E), toolbox, side handle, cleaning cloth,
11
Depth gauge.
13
14
16
16
The following conditions must always be observed
16
when the tool is in use:
17
- The tool must be connected to an alternating current
electric supply in compliance with the information
17
given on the type plate.
17
- The tool is for hand-held use only.
18
- The tool must not be used in places where the sur-
18
rounding conditions may present a risk of explosion.
19
- Changes or modifications to the tool are not per-
19
missible.
en
11