Publicidad
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
4. (Figure 12) Turn the second rear hopper tube so that the
brace holes in the middle of the tube face up. Assemble
the ends of the rear hopper tube onto the ends of the
lower hopper side tubes. Fasten together using plastic
plugs (Z).
REAR HOPPER TUBE
(brace holes on top)
PLASTIC PLUG (Z)
LOWER
HOPPER
SIDE TUBE
5. (Figure 13) Place the assembled lower hopper tubes
into the bottom of the hopper bag
6. (Figure 13) Attach the ends of the lower hopper side
tubes to the inside of the upper hopper side tubes using
two 3/8" x 1/2" clevis pins (P) inserted from the inside,
and two 3/32" hair cotter pins (O).
LOWER HOPPER
SIDE TUBE
UPPER HOPPER
SIDE TUBE
3/32" HAIR
COTTER PIN (O)
3/8" x 1/2"
CLEVIS PIN (P)
HOPPER BAG
BOTTOM
www.mymowerparts.com
ENGLISH
7. (Figure 14) Insert the bag frame strap into the stitched
sleeve along the front edge of the bag bottom.
8. (Figure 14) Assemble the bag frame strap to the lower
hopper side tubes using two 1/4" x 1-1/8" clevis pins
(Q) and 3/32" hair cotter pins (O).
12
BAG FRAME STRAP
1/4" x 1-1/8"
CLEVIS PIN (Q)
9. (Figure 15) Secure the bag corners around the lower
hopper side tubes by snapping the bag flaps to the bag
13
bottom on both sides.
SNAP
8
14
3/32" HAIR
COTTER PIN (O)
15
FLAP
Publicidad
