De-Activate Monitor Mode; Roger Beep On/Off; Technical Specifications - Topcom TwinTalker 3600 Manual De Usuario

12.10 CHANNEL MONITOR
This functions allows you to monitor a set channel and CTCSS code for 15
seconds for any activity.
12.10.1 Activate monitor mode
• Press the
vity, The set channel and CTCSS code is displayed.
• Press the
speaker volume level.
• Channel monitor automatically stops after 15 seconds

12.10.2 De-activate monitor mode

• In monitor mode, press the
activate the monitor mode or wait 15 seconds for monitoring to stop
automatically.

12.11 ROGER BEEP ON/OFF

After the
confirm that you have stopped talking.
To disable the roger beep.
• Turn the units off (§12.1)
• Press and hold the
To enable the roger beep, follow the same instructions.

13 TECHNICAL SPECIFICATIONS

Channels
Sub-code
Frequency
Range
Batteries
Transmission Power
Modulation Type
Channel spacing
TOPCOM TWINTALKER 3600
- button six times to start monitoring the channel acti-
- button to increase or the
- button is released, the unit will send out a roger beep to
PTT
- button while turning the unit on. (§12.1)
3 x AAA Alkaline or NiMH rechargeable
- button to decrease the
- button or the
PTT
8
CTCSS 38
446.00625MHz - 446.09375 MHz
Up to 3 Km (Open field)
=< 500mW ERP
FM - F3E
12,5 Khz
TOPCOM TWINTALKER 3600
- button to de-
11