Turning The Unit On/Off; Changing Channels - Topcom TwinTalker 3600 Manual De Usuario

TOPCOM TWINTALKER 3600
12 USING THE TWINTALKER 3600

12.1 TURNING THE UNIT ON/OFF

Display
To turn ON:
• Press and hold the
play will display the current channel.
To switch OFF
• Press and hold the
play will turn blank.
12.2 ADJUSTING SPEAKER VOLUME.
• Press the
ume. The volume level is displayed together with the Volume icon.
• Press the
12.3 RECEIVING A SIGNAL
The unit is continuously in the RECEIVE mode when the unit is switched
ON and not transmitting.
12.4 TRANSMITTING A SIGNAL
• Press and hold the
played.
• Hold the unit in a vertical position with the MICROPHONE 10cm from
the mouth and speak into the microphone.
• Release the

12.5 CHANGING CHANNELS

• Press the
the display.
• Press the
• Press the
stand-by mode.
8
- button. The unit will "beep" and the LCD dis-
- button. The unit will "beep" and the LCD dis-
- button in stand-by-mode to increase the speaker vol-
- button to decrease the speaker volume.
In order for other people to receive your transmission,
they must also be on the same channel and have set
the CTCSS code you are currently using (⁄12.6).
- button to TRANSMIT. The TX Frame is dis-
PTT
- button when you want to stop transmitting.
PTT
To check the channel activity use the monitor function
(§ 12.10). The maximum transmitting time is limited to
1 minute. Release and the press
restart transmitting.
- button once, the current channel number flashes on
- button or the
- button to select the desired channel and return to
PTT
- button to
PTT
- button to change the channel.
TOPCOM TWINTALKER 3600