Getting Started; Battery Installation; Battery Charge Level - Topcom TwinTalker 3600 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44
TOPCOM TWINTALKER 3600
8

GETTING STARTED

9

BATTERY CHARGE LEVEL

The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the
BATTERY icon on the LCD Display.
When the battery charge level is low, a beep will be heard every 10 minutes to indicate that
the batteries need to be replaced.
Dispose of batteries at a designated battery disposal unit
and not in the household waste. Do not short-circuit &
dispose of in fire. Remove the batteries if this device is
not going to be used for a long period.
6
8.1
CLIP
a
1. To remove the clip from the unit, push the belt
clip (b) towards the antenna, while pulling the
clip tab (a).
2. When re-installing the belt clip, a click indi-
cates the BeltClip is locked into position.
b
8.2
c
1. Remove the belt clip (§ 8.1).
2. Press the battery cover and slide it away from
the antenna. (c)
3. Install three 'AAA' alkaline or rechargeable
batteries following the polarity as shown.
4. Re-install the Battery Cover (c) and Belt Clip
(§ 8.1).
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
REMOVING/INSTALLING THE BELT

BATTERY INSTALLATION

TOPCOM TWINTALKER 3600

Publicidad

Tabla de contenido
loading

Tabla de contenido