B4 - EXHAUST FILTERS
•
The electrostatic exhaust filters improve the ap-
pliance's filtering "performance".
It is recommended to replace it about every two
months.
C -
USING THE APPLIANCE
C1 - AS A VACUUM CLEANER
Fit the filter element (if available)!
•
Release the motor and remove the inner container (s) (fig "C1").
•
Insert the detergent mixture suction hose in its seat on the motor support
(fig. "C2").
The green "PUMP" light MUST be off during use.
The filter element must be kept clean at all times for the appliance to work
well.
We recommend replacing it after about 100 hours' use.
C2 - AS WET VACUUM CLEANER
Always remove the filter element (if available) and the paper filter bag
(if present)!
Use the foam filter (Fig. "B6").
The green "PUMP" light MUST be off during use.
•
When the vacuumed liquids reach the maximum level inside the drum, suction
is automatically shut off by the safety float.
The user is alerted by the increase in the rpm rate of the motor and by the lack
of suction.
Switch off the appliance immediately and empty the drum.
C
3 - TO VACUUM LARGE QUANTITIES OF LIQUID
•
To ensure partial air flow make sure the crevice tool is not completely submer-
ged.
(fig. "B7")
EN
Cod.: 83 021B8X
(fig. "C3")
21