Restore Factory Settings - HomeMatic IP Easy Connect Instrucciones De Montaje

Short orange
lighting (after
green or red
0 6 12 18 24
confirmation)
Mo Tu We Th Fr Sa Su
AUTO
BOOST
Antenna
MANU
symbol ( ) flash-
Offset
ing
Prg
0 6 12
18
Mo Tu We Th Fr Sa Su
AUTO
BOOST
Lock symbol (
MANU
6x long red
Offset
Prg
flashing
1x orange and
1 x green lighting
(after inserting
batteries)
Long and short
orange flashing
(alternating)
10

Restore factory settings

The factory settings of the device can be restored. If you do
this, you will lose all your settings.
To restore the factory settings of the device, please proceed as follows:
Open the battery compartment (B or M) of the device (see figure
•
9 or 10) and remove the battery.
• Insert the battery ensuring that the polarity is correct and press
and hold down the system button (D or L) for 4 s at the same time,
Batteries empty
Communication
problem with
Access Point
or connected
24
device
Operating lock
)
activated
Device defective
Test display
Update of device
software (OTAU)
Restore factory settings
Replace the batteries of
the device (see „8 Re-
placing batteries" on page
53).
Please check the con-
nection with the Access
Point or the connected
devices.
Deactivate the operating
lock via the app.
Please see your app for
error message and con-
tact your retailer.
Once the test display
has stopped, you can
continue.
Wait until the update is
completed.
57