GB
BRUSH CUTTERS OPERATING MANUAL
1. CONGRATULATIONS
Dear Client - May we congratulate you for having
chosen one of our products for your garden.
The your BRUSH CUTTERS has been
manufactured in accordance with the current safety
regulations which protect the consumer.
This manual describes and illustrates the various
operations for assembly, use and maintenance which
are required in order to keep your BRUSH
CUTTERS in perfect condition.
TO FACILITATE READING
The illustrations relating to the assembly and ma-
chine description are to be found at the beginning of
this booklet. Keep these pages open while reading
the assembly instructions.
Should your BRUSH CUTTERS need servicing
or repair, please contact your retailer or an
authorised service centre.
2.ESSENTIAL SAFETY PRECAU-
TIONS
GENERAL REGULATIONS
PRECAUTIONS:
A1 - Failure to comply with the
regulations and precautions when using
the BRUSH CUTTER can cause
serious injury to persons and even
death.
A2 - All users of the BRUSH CUTTERS
must first carefully read the maintenance
and operating manual and familiarise
themselves fully with all controls for
correct operation of the device.
20
A2.1 - Keep this manual for future
reference.
A3 - Do not let children and persons
who are not completely aware of these
instructions use the BRUSH
CUTTERS.
DANGER:
A4 - Beware of objects hurled by the
line head.
A5 - Do not start up and do not use the
BRUSH CUTTER near people, other
animals or obtrusive objects.
During operation we recommend
keeping a minimum distance of 15 m
between the machine and other people.
A6 - The operator is responsible for
any accidents or hazards that may
occur to other persons or their
belongings.
OPERATION:
B1 - Use the BRUSH CUTTER only to
cut grass, weeds and bushes.
Do not use the device for other
purposes.
B2 - Wear clothing and safety gear
suitable for BRUSH CUTTERS
operation.
During operation wear close-fitting
clothing and not loose or baggy
garments.
B3 - Wear approved protective goggles
or visor.
B3.1 - Wear approved noise-damping
earplugs.
B3.2 - Wear a safety helmet in areas
where objects are likely to fall.
B4 - Wear sturdy shoes with non-slip
soles.
B5 - Wear sturdy gloves.
B6 - BRUSH CUTTERS operators must
be in good physical condition. DO NOT