Joovy Caboose S Manual De Instrucciones página 38

Rain Cover (Optional)
NOTE: The rain cover should only be used with the canopy attached.
• Make sure the canopy is in the fully extended (open) position. Carefully open the rain cover to its
fullest.
• Place the rain cover over the stroller. Make sure the front seam is over the front edge of the
canopy. (Joovy tag is towards the front with the long flap towards the rear of the stroller) (108)
• Release the Velcro® and pull the long flap through the rear handlebars just above the cup holder
mounts on both sides of the stroller. Pull each of the rear sides of the rain cover around the outside
of the handlebars.
• Attach elastic loop onto the cup holder mounts on both sides of the handlebar. (109)
• Pull the long flap down and attach the 4 Velcro® attachments together around the vertical frame to
secure this long flap in place. (110) Do this for both sides.
• Pull the rain cover down toward the front wheels and attach the Velcro® straps around the frame
corner. (111) Do this for both sides.
• Unzip the side zipper for easy access. (112)
• Locate the Velcro® at the bottom corner and attach at the seam near the Joovy logo. (113)
I WARNING:
stroller. Never leave this cover in place with child in stroller when exposed
to direct sun or high temperature, as temperature inside may be excessive.
This product is not a toy. DO NOT allow children to play with it.
108
110
38
For use ONLY on the Joovy Caboose S™
109
111