Joovy Caboose S Manual De Instrucciones página 44

Bassinet Adapters (Optional)
• To install the bassinet adapters in the front position, first ensure the front seat and tray are
removed.
• Place the bassinet adapters onto both sides of the stroller frame. Line up the male brackets on the
bottom of the bassinet adapter with the female brackets on the stroller frame. (132)
• Push down on both sides of the bassinet adapter until both brackets snap into place. Pull up the
bassinet adapter on both sides to ensure they are secured.
• Hold the bassinet by the carry handle and lower the bassinet onto the stroller so that the male
bracket on the bassinet latches onto the bassinet adapters. (133) Pull up on the bassinet handle to
ensure it is secure.
• To remove the bassinet, push both round buttons on both sides of the bassinet and pull away from
the stroller. (134)
• To remove the bassinet adapters from the stroller, press the adapter trigger and pull it up off the
stroller. (135)
NOTE: The stroller folds with the bassinet adapters installed on the front of the stroller.
Bassinet (Optional)
• To assemble the bassinet, remove the mattress and unfasten the Velcro® within. (136)
• With one hand braced against the bottom of the bassinet, use your free hand to firmly pull the loop
on the bassinet bracket until the bracket fits into the grooves at the bottom of the bassinet. (137)
Repeat on the other side. The bassinet should now hold its shape.
NOTE: You may need to unzip the bassinet cover for easier access to the other side.
• Replace the mattress. Rezip the bassinet cover if you have unzipped it.
• Attach the bassinet handle by sliding both posts into the mounts on the bassinet. (138)
• Attach the canopy's brackets to the sides of the bassinet frame by hooking them into place. (139)
• Locate the side zipper and zip the canopy to the bassinet fabric. (140)
• Zip up the bassinet cover. (141) Attach the Velcro® of the bassinet cover to the bassinet frame.
(142)
• To install the Bassinet Adapters in the front position, first ensure the front seat is removed.
• Place the Bassinet Adapters onto both female brackets of the stroller frame, the arrow diagrams
are facing backward, the male brackets of the Bassinet Adapters line up with the female brackets
on the stroller frame. (143)
• Push down on both sides of the bassinet until both brackets snap into place. Pull up on the
bassinet on both sides to ensure it is secure.
• To remove the bassinet, push both round buttons on both sides of the bassinet and pull away from
the stroller. (144)
• To remove the bassinet adapters from the stroller, press outward on both adapter triggers and pull
it up off the stroller. (145)
• To disassemble the bassinet, remove the mattress, and unfasten the Velcro® at the bottom of the
bassinet. With one hand braced against the bottom of the bassinet, use your free hand to firmly
pull on the loops attached to the brackets until it disconnects from the grooves and lies down flat.
(146) Repeat for the other side. The bassinet should now lie flat for storage.
• The mattress fabric is washable. Remove the fabric from the foam pad and place the fabric into a
mesh washing bag when washing.
• Before folding, remove the bassinet
44