Mj Transmitting Unit Operation; Mj Transceiving Unit Operation - AUtec Modular Serie Manual De Usuario

6 MJ TRANSMITTING UNIT OPERATION

POWER AND STARTING
To switch on the transmitting unit, in-
sert the starting key and turn it to "I".
To start the radio remote control
functions, press the "START" button
for 1-2 seconds.
After starting, the green signalling
LED always lights up.
TYPE
blinking green LED
blinking red LED, accom-
panied by intermittent
sounds from the buzzer
steady red LED at start-
ing, accompanied by the
continuous sound from
the buzzer
LIMJNMU0
Activate the joystick and/or se-
lector actuators relevant to
whatever movement or selec-
tion command is to be carried
out.
SIGNALS
MEANING
OPERATION NORMAL
LOW BATTERY.
The transmitting unit switches
off 3 and half minutes after the
LED starts flashing
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON INSERTED
6 - MJ transmitting unit operation
COMMAND ACTIVATION
ACTION
///
Switch off the transmit-
ting unit and replace
the battery
Release actuator(s)
and the STOP push-
button
Page 23 of 71