Descargar Imprimir esta página

Installation Instructions - Kenmore 11072812101 Instrucciones De Instalación

Secadora a gas de 29 pulg. (73,7cm)

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
For your safety, the information
in this manual
must be followed
to minimize
the risk of fire or explosion,
or to prevent
property
damage,
personal
injury, or death.
- Do not store or use gasoline
or other flammable
vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical
switch;
do not use any phone in your building.
• Clear the room, building,
or area of all occupants.
• Immediately
call your gas supplier from a neighbor's
phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier,
call the fire department.
- Installation
and service
must be performed
by a qualified
installer,
service
agency,
or
the gas supplier.
In the State of Massachusetts,
the following installation instructions apply:
• Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or
licensed by the State of Massachusetts.
• If using a ball valve, it shall be a T-handle type.
• A flexible gas connector, when used, must not exceed 3 feet.
INSTALLATION INSTRUCTIONS
Check that you have everything necessary for correct installation.
Proper installation is your responsibility.
8in. orl0in,
pipewrench
Knife
8 in. or 10 in. adjustable
Safety glasses
wrench (for gas
connections)
Vent clamps
Flat-blade screwdriver
Pipe-joint compound
resistant to L.R gas
Adjustable wrench that
Caulking gun and
opens to 1 in. (2.5 cm) or
hex-head socket wrench
compound
(for installing
new exhaust vent)
(for adjusting dryer feet)
Level
Gloves
_/_in. nut driver or socket
Pliers
wrench
Parts supplied:
Remove parts package from dryer drum. Check that all parts
were included.
4 leveling legs
Parts needed:
Check local codes and with gas supplier, check existing gas
supply, electrical supply and venting, and read "Electrical
Requirements,"
"Gas Supply Requirements"
and "Venting
Requirements"
before purchasing parts.
Mobile home installations require special parts (listed following)
available for purchase from your local Sears store or Sears
Service Center. For further information, please call
1-800-4-MY-HOME
® (1-800-469-4663).
Mobile Home Installation Kit. Ask for Part Number 346764.
Metal exhaust system hardware.
2

Publicidad

loading