FAZUA evation i.o Manual Original página 24

EN
Description and
Specifications
Features
The numbering refers to the illustrations shown at the beginning of the manual.
The illustrations show the different components belonging to the Charger and
other FAZUA modules. Individual illustrations in the manual might differ slightly
from the real parts depending on the equipment of your eBike.
1.
Charger
2.
Power socket
3.
Power cord
4.
Power plug
5.
Charge connector
6.
Charger LED indicator
7.
Battery Pack
8.
Charge-control indicator
9.
Socket for charge connector
10.
On/off button
11.
Drivepack
Specifications
Lithium-ion Battery Pack 7000
Article number
Rated Input Voltage
Frequency
Output Voltage
Charging Current
Charging time (aprox)
Operating temperature
Storage temperature
Degree of protection
Weight , approx.
44
01-2018-005
V AC 100 ... 240
Hz 50 ... 60
V DC 42
A 2
h 3.5
°C -20 ... +60
°C -20 ... +60
IP 54
kg 0.6
Operation
Warning! Monitor the mains voltage. The voltage supplied to the
Charger (1) must be in the range defined in the specifications.
Warning! Read carefully and observe the battery instructions.
Warning! Pay attention to your battery before each use and before
charging. Make sure terminals and surfaces are clean.
Warning! Before using or charging your Battery Pack, always look
for signs of damage like cracks or burns. Never use or charge a
damaged Battery. Please contact your FAZUA Service Partner or
visit the Fazua Service Platform (www.fazua.com/service).
Connecting the Charger to the mains
Connect the power plug (4) of the power cord (3) to the power socket (2)
of the Charger (1). Then connect the mains cable (country-specific) to the
mains supply.
Note! Charge the Battery Pack (7) only when all safety instructions
are followed. Otherwise, stop and make sure all the safety
instructions are followed before starting the charge.
Connecting the Charger to a standalone
Battery Pack
Connect the charge connector (5) of the Charger (1) into the charge
plug (9) of your Battery Pack (7) (Action A).
Connecting the Charger to a Battery Pack
inserted in a Drivepack
The Battery Pack (7) can be charged either standalone or when inserted in
the Drivepack (11) (See Drivepack Instructions).
Connect the charge connector (5) of the Charger (1) into the charge plug (9)
of your Battery Pack (7) inserted in the Drivepack (11) (Action B).
EN
45