Technical Specifications; Topcom Warranty - Topcom 200 Manual De Usuario

TOPCOM EAR THERMOMETER 200
13 TEMPERATURE ENTITY
• Power on the unit by press the Start - button (1) once. You will hear a short beep. Time mode is displayed.
• Use a small tool to push the °C / °F switch (5) on the back side of the unit.
• A single beep confirms that you have set the temperature to °F
• A double beep confirms that you have set the temperature to °C
14 RESET
• Power on the unit by press the Start - button (1) once. You will hear a short beep. Time mode is displayed.
• Use a small tool to push the reset switch (7) on the back side of the unit.
• All segment will be displayed and all stored information and settings are reset.
15

TECHNICAL SPECIFICATIONS

Model
Sensor type
Displayed temperature range
Operating ambient temperature range
Operating ambient humidity range
Storage environment temperature range
Storage environment humidity range
Display accuracy
Measurement accuracy
Memory
Battery Type
Automatic switch-off
Power consumption
Weight
Classification
16

TOPCOM WARRANTY

16.1 WARRANTY PERIOD
The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased.
Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the
unit-model are indicated.
16.2 WARRANTY HANDLING
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any
defects caused by material or manufacturing faults free of charge.
Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the
faulty units. In case of replacement, colour and model can be different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit
is exchanged or repaired by Topcom or its appointed service centres.
16.3 WARRANTY EXCLUSIONS
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or
accessories not recommended by Topcom are not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage
caused during transportation.
No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.
6
HV-T26
Infrared
32°C ~ 42,9°C (89,6°F ~ 109,3°F)
10°C ~ 40°C (50,0°F ~ 104,0°F)
30 ~ 80% RH
-20°C ~ 40°C (-4,0°F ~ 104,0°F)
30 ~ 85% RH
0,1°C or 0,1°F
36°C ~ 39°C (+/- 0.2°C)
32C to 35.9 - +/- 0.3 C
39C to 42.9 - +/- 0.3C
96,7°F ~ 102,2°F (+/- 0,4°F)
89,6°F ~ 96,6°F (+/- 0,5°F)
102,3°F ~ 109,3°F (+/- 0,5°F)
Last 30 measurements
2 x AAA Non- rechargeable - DC 3V
1 Minute after last measurement
< 0,05 (for voice prompt)
102g (with battery)
• Class IIa
• Internally powered equipment
• IPX0
• Not suitable for use in presence of flammable anaes-
thetic mixture with air or with oxygen or nitrous oxide
• Continuous operation with short-time loading