Operating Mode; Pattern Selection - Promax GV-798+ Manual De Uso

Colour pattern generator GV-798+
[37] V
Vertical pulse output.
[38] H
Horizontal pulse output.
[39] R P
r
R or P signal output according to selection.
r
[40] G Y
G or Y signal output according to selection.
[41] B P
b
B or P signal output according to selection.
b
[42] Mains input and fuse carrier unit with voltage selector.
[43] S-VHS
S-VHS connector.
[44] EURO-AV
Scart connector
[45] RS-232C
RS-232C port connector for remote control purposes.

4.2 Operating mode

4.2.1 Pattern selection

The pattern keyboard [7] allows selecting directly a pattern, the characteristics
of which can vary according to format or system as listed in the specifications section.
The selected pattern will appear in all the outputs except blackburst.
Each key allows the selection of one or more patterns. Besides each key there
is a series of luminous indicators, one for each pattern which may selected. The lit up
indicator signals the active pattern. Keys allowing selection of more than one pattern
have to be repeatedly pressed to sequentially select the various patterns. For example,
to select the 5-step grey scale pattern (5 STEP) press the 10 STEP - 5 STEP key
twice, so long as you are not starting off from the 10-step pattern itself, in which case it
will only be necessary to press once.
06/2016 Page 21