Analog Configuration Menu - Promax GV-798+ Manual De Uso

Colour pattern generator GV-798+
To view the parameters relative to each menu in the display and thus verify the
configuration in use and/or modify it, simply press the selection key of the
corresponding menu [3], [4] or [5].
Once the configuration menu you seek to consult or whose parameter you
intend to change appears in the display, you can progressively select the different
parameters by turning the rotary selector [6]. The selected parameter will appear
shadowed.
To activate a parameter and thereby change its configuration, once selected
(when it is shadowed), press the rotary selector, and the parameter will be underlined
(activated), on turning the rotary selector [6] the various possible options for that
parameter will appear. Pressing on the selector again re-establishes the selection
mode. The changes produced in the display directly affect the information present at
the generator output, though they do not alter the previously stored configurations,
therefore the modified modifications will be lost on switching off the generator.
If you wish to store the new configuration, from any of the configuration menus,
select the STORE field (appearing shadowed), press the rotary selector to activate it
(appearing underlined), turn it to select the memory number according to the format
STOXX (XX from 00 to 31), and finally press the rotary selector until you hear the
signal (the current state of all the parameters on the three configuration menus will then
be stored in the chosen memory).
The different parameters which may be modified in each of the configuration
menus is described next.

4.2.2.1 ANALOG configuration menu

Q
P
O
N
M
K
Figure 5.- Example of the VIDEO-SOUND configuration menu display
06/2016
A R
J
B
C
D
E
F
G
H
I
Page 25