Additional Safety Rules For Sabre Saws - SPARKY TSB 1300C Instrucciones De Uso

ing power tools. Such preventive safety
measures reduce the risk of starting the
d) Store idle power tools out of the reach
of children and do not allow persons
instructions to operate the power tool.
Power tools are dangerous in the hands of
e)
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
g)
Use of the power tool for op-
erations different from those intended could
5) Service
a)
that the safety of the power tool is main-
Additional safety
rules for sabre
saws
WARNING: Before connecting a tool
to a power source ensure that the voltage
nameplate of the tool.
injury to the user, as well as damage to the
tool.
the nameplate rating is harmful to the motor.
Original instructions
-
-
-
Many accidents are
-
This will ensure
During operation provide eye protec-
ing particles. Wear goggles.
toxic ingredients. Wear a dust mask and
Wear safety gloves.
hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make ex-
posed metal parts of the power tool "live" and
WARNING: Always switch off and un-
plug the power tool prior to any adjustment,
servicing or maintenance.
hot after continuous operation. Do not touch
the blade or the work piece immediately after
operation - they may be extremely hot and
you may get serious burns.
whenever possible.
the blade has come to a complete stop before
placing the machine down.
moderate pressure. Overloading occurs when
you apply excessive pressure, resulting in
decrease of motor speed, which may cause
motor.
never be left around the work area.
switch on and let it run for a while. Operate
and body.
sure no one is below when using the tool in
high locations.
-
-
-
-
5
EN