Know Your Product; Operation; Prior To Initial Operation - SPARKY TSB 1300C Instrucciones De Uso

purpose. Any use other than those mentioned
in this Manual will be considered a case of
misuse. The user and not the manufacturer
shall be liable for any damage or injury result-
ing from such cases of misuse.
the safety regulations, the assembly instruc-
tions and the operating instructions found in
this Manual. All persons who use and service
the machine have to be acquainted with this
Manual and must be informed about its poten-
tial hazards. Children and frail people must not
use this tool. Children should be supervised
at all times if they are in the area in which the
tool is being used. It is also imperative that
you observe the accident prevention regula-
tions in force in your area. The same applies
for general rules of occupational health and
safety.
changes made to the tool nor for any damage
resulting from such changes.
rainy weather, or in moist environment (after
liquids and gases. The working place should
be well lit.

Know your product

Before using the power tool, familiarize your-
self with all the operating features and safety
requirements.
Use the tool and accessories only for the ap-
plications intended. All other applications are
expressly ruled out.
1. Support
3. Ventilation slots
4. Rear handle
5. Lock-on button
7. Cord protector
9. Holder
10. Screw
11. Strap
13. Blade
14. Centring pin
15. Joint opening
17. Limiting pin
6
EN
19. Shaft

Operation

This power tool is supplied from single-phase
alternating current mains only. It is double insu-
can be connected to grounded or not grounded
sockets. This power tool is radio suppressed in
compliance with EMC Directive.
This power tool is designed for sawing pipes,
materials (aerated concrete blocks), using suit-
able saw blades

PRIOR TO INITIAL OPERATION

sponds to the value indicated on the name plate
with technical data of the tool.
The power tool must be connected to the power
position. If the plug is connected to a recepta-
the power tool will start operating immediately,
which could cause a serious accident.
der. If the replacement of the supply cord is nec-
essary, this has to be done by the manufacturer
or his agent in order to avoid a safety hazard.
WARNING: Always switch off and un-
plug the power tool prior to any adjustment,
servicing or maintenance.
SELECTING THE BLADE
Select the blade depending on the processed
material - blade for sawing metal, blade for saw-
ing wood, all-purpose blade, etc.
Each one of the blade types listed above is
available with different cutting length.
To select the appropriate blade consider the
material to be cut (metal, wood, etc.) and the
necessary length.
Choose the blade length, so that the blade
projects out of the material 35 mm at least. Ob-
serving this rule will reduce to minimum the pos-
to preserve blade sharpness and increase blade
-
-