Tunturi E30R Manual Del Usuario página 3

•
Make sure the equipment is unplugged
before carrying out any assembly or
maintenance procedures.
•
Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipments and authorised under the
laws of the country in question to carry
out maintenance and repair work.
•
This product must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER: Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or serviceman
if you are in doubt as to whether the
product is properly grounded. Do not
modify the plug provided with the
product - if it will not fit the outlet, have
a proper outlet installed by a qualified
electrician.
NOTE ABOUT SAFETY
FOR UNITS WITH
ELECTRICAL pOWER
Before connecting the equipment to a
power source, make sure that the local
voltage matches that indicated on the
type plate: the equipment operates at
either 230 V or 115 V (North American
version). NOTE! The equipment must
be connected to a grounded wall socket.
Do not use extension wires when
connecting the equipment to the power
source. Always switch off the power and
unplug the equipment from the electrical
outlet immediately after using!
To reduce the risk of burns, fire, electric
shock or injury to persons:
•
The equipment should never be left
unattended when plugged in. Unplug
the equipment from the outlet when
not in use, before carrying out any
maintenance or repair procedures, and
before moving the unit.
•
Do not operate the equipment under
a blanket or other combustive material.
Excessive heating can occur and cause
fire, electric shock or injury to persons.
•
Do not connect the equipment to a
power source, or operate the equipment
if there is any sort of damage to the
power cord or the unit itself.
•
Do not connect the equipment to a
power source or operate the equipment
outdoors or in damp locations.
•
Keep the power cord away from hot
objects.
•
Do not route the power cord beneath a
carper or place any objects on the cord.
Also make sure that the power cord does
not run underneath the equipment.
•
Do not alter (for example lengthen) the
cord between the transformer and the
unit.
NOTE ABOUT
ASSEMBLING THE
EqUIpMENT
Start by unpacking the equipment. The
detailed assembly instructions can be
found at the back of this guide. Follow
the instructions in given order.
Before assembly, check the contents of
the package. If a part is missing, please
contact your dealer with the model,
equipment serial no. and spare part no.
of the missing part. You'll find a spare
part list at the back of this guide. The
hardware kit contents are marked with
* in the spare parts list. The directions
left, right, front and back are defined as
seen from the exercising position. Keep
the assembly tools, as you may need
them e.g. for adjusting the equipment.
GB
O W N E R ' S M A N U A L
3