Disconnecting The Cylinder From The Compressor - Invacare HomeFill II Oxygen System IOH200AW Manual Del Usuario

8. Align the cylinder fillport with the connector fillport.
9. Pull UP on the outer ring (sleeve) of the connector fillport while
pushing DOWN on the cylinder to couple the cylinder fillport
into the connector fillport.
The cylinder is properly connected when an audible
"click" is heard.
4.4 Disconnecting the Cylinder from the
Compressor
1195663-A
WARNING!
– NEVER use tools of any kind to connect/disconnect
the cylinder and the compressor. Otherwise, severe
injury and/or damage may occur.
1. Press the compressor power switch A to the Off (O) position.
2. Grasp the cylinder B in the area behind the cylinder fillport C.
3. With the other hand, grasp the outer ring (sleeve) of the
connector fillport E and push DOWN F.
4. Lift up on the cylinder to remove from the connector fillport.
Usage
21