By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment
and human health, which could otherwise be caused by inappropriate waste handling of this product.
If your equipment contains easy removable batteries or accumulators, please dispose these separately according to your
local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the shop where you have purchased
the product.
In Countries outside of EU: If you wish to discard this product, please contact your local authorities and ask for the correct
way of disposal.
COMMON SENSE PRINTER CARE
PRINTER CARE
1 Your printer is a precision instrument. Do not get it wet or drop it. Also, do not expose to sand.
2 If you are not using your printer for a long period, unload the battery and keep it where it will be safe from heat, dust, and
moisture.
3 Do not use solvent such as thinner and alcohol to remove dirt.
4 Keep the film chamber and printer interior clean to avoid damaging films.
5 In hot weather, do not leave your printer in hot places such as in a car or on the beach. Do not leave it in damp places for
long periods.
6 Moth repellent gas such as naphthalene may affect your printer and prints. Be careful to keep your printer or prints in a
chest or bureau.
7 Because your printer is software-controlled, there is the chance that on rare occasions malfunction. If you experience
incorrect operation, reset by removing the batteries and then reloading them after a while.
8 Note that the temperature range within which your printer can be used is +5°C to +40°C (+41°F to +104°F).
9 Do not use the printer in aircraft, hospitals or other locations where the use of mobile phones is prohibited.
0 If the printer causes problems with radio or TV reception, move the printer further away from the radio or TV.
instax_BO-B_6lang.indb 23
EN
23
4/13/2016 10:33:41 AM