Charging The Battery; Charging Indicator - FujiFilm Instax Share SP-2 Manual De Instrucciones

Inserting/Charging the Battery (Continued)

Charging the Battery

EN
Connect the printer and an AC power adapter supplied
with your smartphone using the supplied USB cable, then
connect the AC power adapter to an indoor power outlet.
The battery remaining LED indicates the battery charge
status. For details, see the table on the right column.
• Use an AC adapter to meet the rated output below:
DC 5.0 V/1000 mA
• You can print an image while charging is in progress.
• Charging time is approximately 90 minutes.
6
instax_BO-B_6lang.indb 6

Charging Indicator

Indication Battery status/Action
Lights red (ON)
Charging is in progress.
Flashes red (OFF)
Lights green (ON) Charging is more than half
Flashes green (OFF) completed.
Flashes green, then
Charging is completed.
goes off (OFF)
Flashes green and An error is being occurred. Stop
red alternately charging.
Charging from a PC:
• Connect the printer and PC directly. Do not connect
them via a keyboard or USB hub.
• If the PC enters the sleep mode while charging is in
progress, charging will stop. If you continue charging,
resume the PC and reconnect the USB cable.
• You may not charge the printer from a PC depending
on your PC specifications, settings, or status.
4/13/2016 10:33:37 AM