Kickback Safety Devices On This Saw; Chain Brake; Storage, Transporting, And Disposal - Oregon СS250 Manual De Instrucciones

OREGON® CORDLESS TOOL SYSTEM
CHAIN SAW MODEL CS250
KICKBACK SAFETY DEVICES
ON THIS SAW

CHAIN BRAKE

The chain saw comes equipped with a
chain brake, which stops both the motor
and the motion of the chain when
kickback occurs (Fig 4) The chain brake
can be activated by the forward motion
of the hand guard as the saw rotates
backward during kickback; it can also be
activated by the inertial forces generated
during rapid pushback
FIG. 4
DANGER: NEVER MODIFY OR
ATTEMPT TO DISABLE THE CHAIN
BRAKE.
CHAIN
This saw comes equipped with a saw
chain that met the reduced kickback
requirements of ANSI B175 1 when tested
on a representative sample of chain saws
For replacement chain, see "Specifications
and Components" in this manual
BAR
This saw comes equipped with a guide
bar that has a small radius nose Small
radius noses generally have less potential
for kickback
When replacing the bar, be sure to order
the bar listed in this manual
AD 0213 - F/N 551309
STORAGE, TRANSPORTING,
AND DISPOSAL
STORING THE SAW
• Remove the battery pack and
thoroughly clean the saw See
"Maintenance and Cleaning" in this
manual Install the blade cover prior to
storing
• Store in a dry place out of reach of
children or pets
• It is normal for a small amount of oil to
seep from the bar when the chain saw is
not in use To protect against seepage,
install the blade cover and place an
absorbent pad under the guide bar
STORING THE BATTERY PACK
When storing the battery pack longer
than nine months, follow these
guidelines:
• Remove the battery pack from the chain
saw or charger
• Store in a cool, dry place
• Keep out of reach of children or pets
• To prolong battery life, never store
battery pack in a completely discharged
condition (Fig 5)
FIG. 5
INDICATOR LIGHTS
• Store at a temperature between -20°C
and 30°C (-4°F to 86°F)
SAFETY RULES
11