Making spirals and chopping vegetables
1.
Insert the blade disc into the motor unit.
2. Put the lid on the blade disc.
3. Turn the lid until the mark is on the "closed" position.
4. Always be careful with the blades, they are very sharp.
5. Switch on the device.
6. Push the vegetables against the blades with the help of the tamper.
7.
Only open the lid when the blades have stopped moving.
8. After use you can take the device apart again in the opposite sequence.
Tips for better results
•
There are four small struts on the bottom of the tamper. Arrange the
vegetables in the centre of the four bars to stabilise them. This will give you
better results.
•
Do not use the device for longer than 5 minutes at a time. Let the device
cool down before you continue using it.
30