Preparing Coffee With Preset Timer - Beem Fresh-Aroma-Perfect Deluxe Manual De Instrucciones

Brewing

Preparing coffee with preset timer

EN
60
NOTE
To brew coffee using the timer, the time must be set as
►
described in the section Setting the time.
Activate the display lighting by pressing any key. The lighting
►
goes out 60 seconds after the last button was pressed.
Programming the preset time
Press the "Auto/Prog" button (22) and keep the button
‹
pressed for about 3 seconds. The indicator lamp "Auto/
Prog" (23) starts flashing.
Use the "H" button (30) and "M" (31) to set the requested
‹
starting time.
For brewing coffee with coffee powder:
Also press the "Brew" button (26) while as the "Auto/Prog"
‹
indicator lamp (23) is still flashing. The "Brew" indicator
lamp (24) lights up.
Fill water into the water tank and the coffee powder into the
‹
filter.
Brewing coffee with coffee beans:
Make sure that the "Brew" indicator lamp (24) is not on. If and
‹
when required, press the "Brew" button (26) until the "Auto/
Prog" indicator lamp (23) continues to flash. The "Brew"
indicator lamp (24) goes off.
Set the number of cups, the strength of the coffee and the
‹
grinding fineness.
Fill water into the water tank and the coffee beans into the
‹
grinder.
Place the filter.
‹
BEEM - Elements of Lifestyle