JVC DX-T55 Manual De Instrucciones página 41

Sistema de componente compacto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

AUDIO menu
Item
DIGITAL AUDIO OUTPUT
DOWN MIX
D. RANGE COMPRESSION
OTHERS menu
Item
RESUME
ON SCREEN GUIDE
DivX REGISTRATION
Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-
in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
Set this item properly according to your digital audio connection to play sound of the surround
multichannel audio on a DVD Video.
• This setting is effective for digital audio output if "DIGITAL AUDIO OUTPUT" is set to "PCM
ONLY."
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.
Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.
AUTO: You can enjoy powerful playback sound with full dynamic range.
ON: Select this when you want to fully apply the compression effect to make the sound at lower
volume clear (useful at midnight).
You can select Resume.
ON: The System resumes playback from the position where playback has been stopped if the disc is
still in the disc tray.
OFF: Resume is deactivated.
Activate or deactivate the on-screen guide.
ON: Activate the on-screen guide.
OFF: Deactivate the on-screen guide.
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a disc in which the Registration Code recorded, the System's Registration
Code is overwritten for copyright protection.
Contents
Contents
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ca-dxt55Sp-dxt55fSp-dxt55s

Tabla de contenido