JVC DX-T55 Manual De Instrucciones página 44

Advanced Disc Operations
Programming the Playing Order—Program Play:
• While programming steps...
– Your entry will be ignored if you have tried to program
an item number that does not exist on the disc (for
example, selecting track 14 on a disc that only has 12
tracks).
– For SVCD/VCD/CD loaded on the other tray than the
current one, the System may prompt for the group
number entry as well, however, these entries will be
ignored during playback.
• The programmed contents will remain until you erase it.
• While the PROGRAM indicator is on, you cannot change
the disc to play. (DISC 1 – 5 on the remote control and 3
on the main unit do not work.)
On-Screen Disc Operations
Operations Using the On-screen Bar:
• A-B Repeat:
– A-B Repeat cannot be used on some DVDs.
– A-B Repeat is possible only within the same title or
within the same track.
Operations on the Control Screen:
• For DVD-VR playback...
– Original Program: The System can play back the
original picture in the recorded order.
– Play List: The System can play back the play list edited
by the recording equipment. The control screen for the
play list appears only when the disc has the play list.
– Resume is not available.
– For details about DVD-VR format and play list, refer to
the manual of the recording equipment.
• For JPEG files playback...
– It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of
more than 640 x 480, it will take a long time to be
shown.)
– This System can play only baseline JPEG files*.
Progressive JPEG files* or lossless JPEG files* cannot
be played.
* Baseline JPEG format:
Progressive JPEG format: Used for web.
Lossless JPEG format:
– This System can play back JPEG files with the extension
code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).
– This System may not play back JPEG files properly if
they are recorded on devices other than digital still
camera.
– During slide-show playback, zoom cannot be operated.
40
(see pages 19 to 21)
(see pages 22 to 28)
Used for digital cameras,
web, etc.
An old type and rarely used
now.
• For DivX playback...
– This System can play back DivX files with the extension
code <.divx> <.div> <.avi> (regardless of the letter
case—upper/lower).
– When making a disc, use the UDF-Bridge format.
"Multi-border" is not supported.
– The System supports the DivX files whose resolution is
720 x 480 pixels or less (30 fps), and 720 x 576 pixels or
less (25 fps).
– Audio stream should conform to MPEG1 Audio Layer-2
or MPEG Audio Layer-3 (MP3).
– The System does not support GMC (Global Motion
Compression).
– The file encoded in the interlaced scanning mode may
not be played back correctly.
– You cannot use the following functions—One Touch
Replay, Slow motion, A-B Repeat, Program Play,
Random Play, and on-screen operations.
• For ASF playback...
– This System can play back ASF files with the extension
code <.asf> (regardless of the letter case—upper/lower).
– This System supports ASF files whose resolution is
352 x 288 pixels or less.
– Some recorded files may not be able to playback
depending on file characteristics, kind of digital camera/
video camera, or recording conditions.
– You cannot use the following functions—One Touch
Replay, Slow motion, A-B Repeat, Program Play and
Random Play.
Recording Operations
General:
• You cannot change the source during recording.
• There is leader tape which cannot be recorded onto at the
start and the end of cassette tapes. Thus, when recording
discs or radio broadcasts, wind the leader tape first to
ensure that the recording will be made without any music
part lost.
• If no cassette is inserted or a protected tape has been
inserted, "NO REC" appears on the display.
• If you select the Surround Mode (DANCE, HALL,
STADIUM—see page 13), you can also record the
surround elements. (Other sound adjustments do not affect
the recording level.)
(see pages 29 to 30)