Zhermack FURNACE DM 4R Manual De Usuario página 164

B. Press ENTER (28). The current day of the week appears on the display (11).
C. Key in the desired day (1: Monday, 2: Tuesday, 3: Wednesday, 4: Thursday, 5: Friday; 6:
Saturday, 7: Sunday).
• The relevant day appears on the display (11).
D. Press ENTER (28):
• for a fraction of a second the legend "hh.nn" appears on the display (11). This is followed
by the current time.
E.
Program the time for the selected day by keying in the relevant numbers.
The two numbers on the left-hand side of the display (11) give the hour while the
two numbers to the right show the minutes.
If, for example, you wish to enter the time 08.30 key in 0 – 8 – 3 - 0 so that the
number 8 remains on the left-hand side of the display (11).
F. Press ENTER (28) to save the data:
• the oven start day remains on the display (11).
To check the start time press "HR.MIN" (10).
24 hours prior to the start of oven heating the start time appears on the display
(11). 1 hour before heating a flashing countdown of the remaining minutes
appears on the display (11).
If a delay time of less than 24 hours is set the heating start time is shown on the
display (11).
IMMEDIATE START
7.6
There are two different ways of starting the oven:
A. With the oven OFF, press START-STOP (20). The legend "tImE" appears on the display (11).
• Press ENTER (28). The current day of the week appears on the display (11).
• Press ENTER (28). The "hh.nn" legend appears on the display (11) for a fraction of a
second followed by the current time.
• Press ENTER (28) and the oven will start working.
B. With the oven OFF, press PHASE (13). The legend "F" appears on the display (15).
Press START-STOP (20) and the oven starts working.
To modify the clock from daylight saving time to summer time and vice versa proceed as follows:
• with the oven OFF press the HR-MIN key (10).
• the legend "tImE" appears on the display (11).
• press ENTER (28). The display (11) shows SOL (= daylight saving time) or LEG (= summer time).
• press PROG. (19) to change the time.
• press ENTER (28): for a fraction of a second the "hh.nn" legend appears on the display (11), followed
immediately by the current time.
• press ENTER (28) and the oven returns to OFF mode.
164 of 272
MAINTENANCE AND USE MANUAL
EN
FURNACE DM