Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Inglese
If costumer service or repair parts are required contact your local COSMO Dealer. He
Stop power unit, set park brake and remove ignition key before servicing, repairing,
has trained personnel, repair parts, and the equipment needed to service your implement.
adjusting, or unplugging. Stay away from rotating spinners. Keep others away.
These parts have been specially designed and should only be replaced with genuine
Keep hands, feet, hair and clothing away from moving parts. Do not allow riders.
COSMO parts.
The loading operations have to be carried out when the machine doesn't work in
Serial Number:
order to avoid the contact with the internal powers shovels in the spout.
The loading of the material with the shovel have to be made without contact with the
For prompt service always use the serial number and model number when ordering
Mixer's spout.
parts from your COSMO Dealer. Be sure to include your serial and model numbers
in correspondence also.
Your dealer wants you to be satisfied with your new machine. If for any reason you
are not satisfied with the service received, the following actions are suggested:
Securely attach to towing unit. Use retainers through mounting pins.
1) Discuss the matter with your dealership Service Manager make sure he is aware of
any problems you may have and that he has had the opportunity to assist you.
2) If you are still not satisfied, seek out the Owner or General Manager of the dealership,
explain the problem and request assistance.
Stop power unit, set park brake and remove ignition key before servicing, repairing,
3) For further assistance write to:
adjusting, or uplugging.
Place safety stands or blocks under frame before working under machine.
SECTION 1: SAFETY
1 - Do not allow anyone to operate this machine who has not been properly trained
in its safe operation.
2 - Do not let children operate the implement.
For your safety and to developing a better understanding of the equipment, throughly
3 - Wear proper eye protection to prevent injury from flying objects.
read the Operator's Sections of this manual before operation. The Parts Section
4 - Never dismount from a moving tractor.
provided with this manual is for ordering replacement parts only, it does not show
5 - Do not leave the tractor or the implement unattended with the engine running.
proper and safe disassembly and reassembly procedures.
6 - Do not stand between the tractor and the implement during hitching.
7 - Never allow passengers.
8 - Travel slowly over rough terrain and be alert to holes and gullies.
9 - Do not grease or oil implement while it is in use.
The SAFETY ALERT SYMBOL indicates that there is a potential hazard to personal
10 - Loose fitting clothing should not be worn as it may catch in moving parts.
safety involved and extra safety precautions must be taken. When you see this
11 - After repairing or adjusting, make sure all tools and parts are removed from the
symbol, be alert and carefully read the message that follows it. In addition to design
implement before attempting to operate it.
and configuration of equipment; hazard control and accident prevention are dependent
12 - Detach and store implements in an area where children normally do not play.
upon the awareness, concern, prudence and proper training of personnel involved
Stabilize implements by using suitable supports and block wheels.
in the operation, transport, maintenance and storage of equipment.
Pag. 10
Pag. 12
OWNER ASSISTENCE
DURING OPERATION
AFTER OPERATION
DURING MAINTENANCE
COSMO s.r.l.
Località Roata Raffo, 64 - Z.I. - 12022 BUSCA (Cn) - Italy
Phone +39.0171.946654 - 55 Fax +39.0171.946723
Web site: www.cosmosrl.com - E-mail: imcosmo@cosmosrl.com
GENERAL SAFETY
IMPORTANT SAFETY INFORMATION
SAFETY NOTATIONS:
GB
Inglese
COSMO
COSMO
Publicidad
