Publicidad
Idiomas disponibles
Idiomas disponibles
1 - Be alert to traffic when crossing or operating near road-ways. Always maintain
complete control of the machine.
Know your state and local laws concerning highway safety and regulations.
Comply with these laws when trasporting machinery.
2 - Limit transport speed to 20 mph. Transport only with a farm tractor of sufficient
size and horse power. See "Tractor Requirements".
3 - Always make sure flashing safety lights, "Slow Moving Vehicle" emblem, and re-
flectors are in place and visible prior to transporting the machine on pubblic roads.
4 - Use warning flags or approved warning lights at night and during other periods
of poor visibility. Do your best to prevent highway accidents.
1 - Your MIXER comes equipped with all safety decals in place. They were designed
to help you safely operate your implement. Read and follow their directions.
2 - Keep all safety decals clean and legible.
3 - Replace all damaged or missing decals. To order new decals go to your COSMO
dealer and refer to the parts section "Decals Placement" for the proper decal
part numbers.
4 - Refer to this section for proper decal placement.
To install new decals:
a. Clean the area the decal is to be placed.
b. Peel backing from decal. Press firmly on surface being careful not to cause
air bubbles under decal.
This publication contains the instructions for use and maintenance of MIXER 80
cement mixer and general mixer for agricultural and other use.
COSMO
TRANSPORTING
SAFETY DECALS
INTRODUCTION
GB
Inglese
Pag. 13
Publicidad
