Setting Loop - Pioneer CDJ-850 Manual De Instrucciones

Adjusting the cue point position
1 While paused at the cue point, press [SEARCH m,
n] 3.
The [PLAY/PAUSEf] and [CUE] indicators flash.
2 Press [SEARCH m, n] 3.
The cue point can be fine-adjusted in units of single frames.
! The same operation is possible using the jog dial.
3 Press [CUE] 2.
The position at which the button was pressed is set as the new cue
point.
! When a new cue point is set, the previously set cue point is
canceled.
Returning to Cue Point (Back Cue)
During playback, press [CUE] 2.
The set immediately returns to the currently set cue point and pauses.
! When [PLAY/PAUSEf] is pressed, playback starts from the cue
point.
Checking Cue Point (Cue Point Sampler)
After returning to the cue point, press and hold in [CUE] 2.
Playback starts from the set cue point. Playback continues while the
button is held in.
Setting Cue Point during playback (Real
Time Cue)
During playback, press [LOOP IN/ CUE (IN ADJUST)] 8.
The point at which the button was pressed is set as the cue point.
Setting auto cue
When a track is loaded or the track search operation is performed,
the silent section at the beginning of the track is skipped and the cue
point is automatically set at the point immediately before the sound
starts.
Press [TIME MODE (AUTO CUE)] h for over 1 seconds.
Auto cue is set to on.
[A. CUE] lights on the main unit display.
! When [TIME MODE (AUTO CUE)] is pressed again for at least 1
second, auto cue is set to off.
! The auto cue level setting remains in the memory, even when the
power is turned off.
Changing the auto cue level
The acoustic pressure level identified as a silent section with the auto
cue function can be selected from eight levels.
–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB
! The auto cue level setting remains in the memory, even when the
power is turned off.
! The auto cue level can be changed using one of the procedures
described below.
 Using the [MENU (UTILITY)] m button
1 Press [MENU (UTILITY)] m for over 1 second.
The [UTILITY] screen is displayed.
20
En
2 Turn rotary selector p then press it.
Select [A. CUE LEVEL].
3 Turn rotary selector p then press it.
The auto cue level setting changes.
 Using the [TIME MODE (AUTO CUE)] h button
1 Press [TIME MODE (AUTO CUE)] h for over 5 seconds.
The auto cue level setting changing mode is set.
The current auto cue level is shown on the main unit display.
2 Press [CUE/ LOOP CALLc/ d] s.
The auto cue level setting changes.

Setting Loop

1
1 / 16
TIME AUTO
MODE CUE
2
1 / 8
a
IN / CUE OUT RELOOP/ EXIT
LOOP
4
1 / 4
IN ADJUST OUT ADJUST
8
1 / 2
9
AUTO
BEAT LOOP
8
BEAT
SELECT
7
6
DIRECTION
5
REV
TRACK SEARCH
4
SEARCH
3
1 During playback, press [LOOP IN/ CUE (IN ADJUST)] 8.
Loop In Point is set.
! This operation is not necessary if you have already set a Cue Point
as a Loop In Point.
2 Press [LOOP OUT (OUT ADJUST)] 7.
The loop out point is set, and loop playback begins.
Fine-adjusting the loop in point (loop in
adjust)
1 During loop playback, press [LOOP IN/ CUE
(IN ADJUST)] 8.
[LOOP IN/ CUE (IN ADJUST)] switches to a fast flashing and
[LOOP OUT (OUT ADJUST)] turns off.
The loop in point's time is displayed on the main unit display.
2 Press [SEARCH m, n] 3.
Loop points can be fine-adjusted in units of single frames.
! The same operation is possible using the jog dial.
! The loop in point can be adjusted by ±30 frames and must be in
front of the loop out point.
3 Press [LOOP IN/ CUE (IN ADJUST)] 8.
! Normal loop playback resumes.
! Normal loop playback also resumes if no operation is performed
for over 10 seconds.
! When playing music files, the loop in point can only be adjusted
within the same track.
Fine-adjusting the loop out point (loop
out adjust)
1 During loop playback, press [LOOP OUT
(OUT ADJUST)] 7.
[LOOP OUT (OUT ADJUST)] starts flashing quickly and [LOOP IN/ CUE
(IN ADJUST)] turns off.
VINYL
SPEED ADJUST
TOUCH / RELEASE
CUE / LOOP
DELETE MEMORY
CALL
JOG MODE
VINYL
TEMPO
6 10 16 WIDE
MASTER
TEMPO