Use In Accordance With Specifications - Kulzer cara Scan 4.0 Guia De Inicio Rapido

cara Scan 4.0 Quick Start Guide
4
CAUTION
Connecting cable and plug must be checked for damage prior to operation. If any
damage exists, the unit must not be connected to the mains. A damaged mains
connecting cable may only be replaced by a mains connecting cable of the same type:
·
L = 2.5 m long A 10/16 A, 250 V, 90° Schuko plug, IEC 320 C13 connector for European
countries.
·
L = 1.8 m long IEC 60320 C13 Femmina / NEMA 5-15 Maschio for USA and North
American countries.
Customer is obliged to ensure proper protective earth supply in electrical installation.
Specification for cara Scan 4.0: 230 V mains socket (3 prong only; phase-neutral ground);
separate fuse 16 A, slow blow.
If not observed risk of electrical shock and serious harm of operator or third parties
cannot be fully avoided.
WARNING
This symbol warns of the dangers of electric voltage. In the case of non-compliance the
result of an electrical shock with all known effects can be death. Removing the scanner
cover this safety symbol is visible on the surface of the main power unit. Works at the
electrical equipment of the unit must only be performed by the authorized Kulzer GmbH
service agents and in the safe condition (voltage cleared). Please observe the safety
instructions when carrying out servicing.
CAUTION
Proper function and safety of the unit are only guaranteed if the required tests,
maintenance and repair work have been performed by Kulzer GmbH service agents or by
personnel adequately trained by Kulzer GmbH. Only permissible original spare parts
must be used. The use of different parts holds unknown risks and must be avoided at
any rate.
3

Use in accordance with specifications

The structured light 3D scanner is a laboratory unit for acquiring gypsum or implant
models concerning dental field. The unit is not suitable or intended to acquire any other
type of object, food or pets.
NOTE
·
Due to various possible causes for bad models acquisition results, Kulzer GmbH does
not grant any guarantee for such cases.
W19641_REF_66069511_13_QSG_02GB_caraScan4.0_V02
© 2018 Kulzer GmbH