Symbols - Craftsman 315.FS2000 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBol SIGNAl
DANGER:
WARNING:
cAutIoN:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBol
Safety Alert
Read Operator's Manual
Eye Protection
Keep Hands Away
Wet Conditions Alert
Recycle Symbols
V Volts
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute

SYMBolS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand op-
erator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Keep hands and body away from the discharge area of the tool.
Do not expose to rain or use in damp locations.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion
(Li-ion) batteries. Local, state or federal laws may prohibit
disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or
disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
7 – English
DESIGNAtIoN/EXplANAtIoN