Technical Details; General Safety Instructions; Application - IKRA HTI 5230 Instrucciones De Manejo

Grass Trimmer

1. Technical Details

Model
Rated Voltage
Nominal Frequency
Nominal Consumption
No-load Speed
Cutting Width
Line Diameter
Line Length
Line Feed
Weight
Sound Pressure Level
(EN 60335-2-91)
Vibration
(EN 60335-2-91)
Interference suppressed in accordance with EN 55014 and EN 61000.
The machine comply with the safety class II/VDE 0700
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60335-1 and EN 60335-2-91 and fully comply
with the provisions of the Product Safety Act.

2. General safety instructions

Noise emission information in accordance with
the German Product Safety Act (ProdSG) and
the EC Machine Directive: the noise pressure
level at the place of work can exceed 80 dB(A).
In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please ob-
serve the local regulations when operating
your device.
The machine has been constructed according to
the latest technology and in accordance with the
recognised technical safety regulations. Never-
theless, use of the machine can involve risks to
the user or third persons, and can cause dam-
age to the machine or other objects.
Use the machine in a safety conscious man-
ner for suitable applications and in technically
perfect condition only and according to the
GB | Operating Instructions
V~
Hz
W
r/min
cm
mm
m
kg
dB (A)
m/s²
operating instructions! Immediately rectify or
have any faults rectified which could adversely
affect safety!
Read the instruction manual carefully. It is impor-
tant that you fully understand and observe the
safety precautions and warnings before starting
and using your trimmer for the first time. Care-
less or improper use of any trimmer may cause
serious or fatal injury. Observe all applicable
safety regulations, standards and ordinances.
Please familiarise yourself with the machine
before the first use.

3. Application

The machine is exclusively intended for cutting
decorative lawn, i.e. lawn edges. Any other use
or use going beyond that, such as the cutting of
brushwood and hedges or large areas of lawn,
is considered improper use. The manufacturer /
supplier is not liable for damages resulting from
GB-2
HTI 5230
230-240
50
520
9.800
30
1,4-1,6
2 x 4
Tap'n go
2,4
84
K=3,0 dB (A)
< 2,5 ²
K=1,6 m/s