Intelliflo Operator Control Panel; Controls And Leds - Pentair IntelliFlo WhisperFlo VF Guide D’iNstallation

10
This section describes the operator control panel controls and LEDs.

IntelliFlo Operator Control Panel

Controls and LEDs

1 Filter button/LED: Starts Filter mode. The LED is on when Filter mode is active.
2 Vacuum button/LED: Starts Vacuum mode. The LED is on when Vacuum mode is active.
3 Backwash button/LED: Starts Backwash mode. The LED is on when Backwash mode is active.
4 Manual button/LED: Starts Manual mode. The LED is on when Manual mode is active.
5 Select button: Displays available menu items or enters edit mode for changing a value on line two of the display.
6 Escape button: Moves to next level up in the menu structure, and/or stops editing the current setting.
7 Menu button: Accesses the menu items if the pump is stopped.
8 Enter button: Saves current menu item setting. Press this button to acknowledge alarms and warning alerts.
IntelliFlo VF Installation and User's Guide
FILTER
POWER
1
2
5
Operator Control Panel
®
12:15
15.W
RUNNING
Section 2
4
3
6
7
8