External Control Menu; External Control Setup With Intellicomm - Pentair IntelliFlo WhisperFlo VF Guide D’iNstallation

44

External Control Menu

External Control Setup with IntelliComm

External Control Mode is activated and operated through the IntelliComm communication center. See
"External Control Mode" on page 20
To access the Ext. Ctrl. menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. "Pool Data" is displayed.
3. Use the Up and Down arrow buttons to scroll to the "Ext. Ctrl." menu item. Press the Select
button to select it. "Program 1" is displayed. Use the Up and Down arrow buttons to scroll to the
desired program (Program 1-4) and press the Select button to select it.
MENU
Ext. Ctrl.
a)
To choose whether the program will be Disabled
or Enabled:
"Activation" setting (Default Enabled). To change the
setting, use the up Up and Down arrow buttons to toggle
between the Disabled and Enabled options. Press the
Select button to select one. Go to step 5, below.
b)
To set the flow using External Controls: U
Down arrow buttons to scroll to the "Set Flow" setting.
Press the Select button to access it (Default 12m
change the setting, see step 4, below.
IntelliFlo VF Installation and User's Guide
for more information on operating the IntelliFlo by remote control.
® ®
Ext. Ctrl.
12:00 12:07
Program 1
Press the Select button to access the
®
Ext. Ctrl. Ext. Ctrl.
12:08
Program 2 Program 3
se the Up and
/h). To
3
® ®
Ext. Ctrl.
12:10 12:11
Program 4
®
Program 1 12:14 Program 1
Enabled 12m³/h
Activation Set Flow
®
12:16