Troubleshooting; Chart Of Medical Device Symbols; Chart Of Electrical Symbols Used - Sunoptic Surgical LED-4000 Manual Del Operador

10.

TROUBLESHOOTING

Problem
Main switch power indicator
(refer to 4.1) is not lit when
switched on.
The power indicator is lit, but
lamp is still off.
11. CHART OF MEDICAL DEVICE SYMBOLS USED
Manufacturer
Date of manufacture (YYYY-MM-DD)
"Authorized Representative" in the European Community
Caution, consult accompanying documents
Caution: Federal law restricts this device to sale by or on the
order of a licensed healthcare practitioner
Consult Instructions for Use
CE mark
Not for disposal in general waste
Caution: Hot Surface
Caution: Dangerous Voltage
Product Safety Mark
Do not use if package is damaged.
12.

CHART OF ELECTRICAL SYMBOLS USED

LIT-216 Sunoptic Surgical
Rev. C
Solution
Check that the AC power cord is properly connected.
Check the unit fuses. Replace if necessary; otherwise
contact Customer Service.
Press Stand-by switch to turn on the LED.
Insert light guide into the active turret port.
Increase the LED intensity.
AC Current
Equipotentiality
Power on
Power off
Type BF
Protective Earth (Ground)
®
Page 13 of 114
(English)