Kapro PROLASER 875 Manual Del Usuario página 25

14) Mark point a2 on the wall A, in the middle of the side vertical
beam, near the point a1, and at the same height.
(see figure #13).
X
d1
15) Measure the distances:
16) The difference Δ from a1 to a2 should not be more than 3 mm,
otherwise, send the laser level to a qualified technician for
repairs.
17) Repeat the same procedure (1 – 16) to check the perpendicularity
between the other 2 vertical beams.
D
Figure # 13
Figure # 13
Δ = from a1 to a2
A
a1 X a2
X
X
25